Welcome to RAXIMO
Motorcycle Design Parts – TÜV approved!
With RAXIMO, we are realising our vision of a sensible design tuning system for motorbikes. We have had all relevant components approved by the TÜV (German Technical Inspection Authority) and provided with ABE road approval by the KBA (German Federal Motor Transport Authority).
The special thing about it is the variety with up to 9 always the same colours in which you can order these high-quality, anodised parts. This results in 6561 possible colour combinations for the BCF brake and clutch levers, for example. Each assembled part is unique and is assembled and checked at our premises near Munich according to your order and colour wishes.
RAXIMO is "Made in Germany" in design and individual assembly.
CUSTOMIZE YOUR BIKE
RAXIMO – MOTORCYCLE DESIGN PARTS
RAXIMO BCF, BCS & BCE
Brake lever & clutch lever
At the heart of RAXIMO are our TÜV approved brake and clutch levers for over 1500 motorbike models. Available in the versions "short", "foldable" and "extendable", they can be freely configured in terms of colour and are specially produced to order according to the individual colour requirements of each customer and delivered with the matching adapters.
-
![BCF brake lever & clutch lever – "foldable"]()
BCF brake lever & clutch lever – "foldable" BCF brake lever & clutch lever – "foldable"
The BCF lever is foldable, what allows the lever to fold away upwards in case of an overturn. Unintentional folding up is prevented by a mechanism during normal operation.
The lever is adjustable in length by 35 mm by means of a dovetail joint and corresponds approximately to the original lever in its maximum length. The end parts can be reordered in a set in 9 colours after scratching.
The levers are 6-way adjustable in traction without affecting switches.
The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.
-
![BCS brake lever & clutch lever – "short"]()
BCS brake lever & clutch lever – "short" BCS brake lever & clutch lever – "short"
The levers can be adjusted 6-fold in the pull path, without affecting switches in general.
The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.
-
![BCE brake lever & clutch lever – "extendable"]()
BCE brake lever & clutch lever – "extendable" BCE brake lever & clutch lever – "extendable"
The lever is adjustable in length by 35 mm by means of a dovetail joint and corresponds approximately to the original lever in its maximum length. The end parts can be reordered in a set in 9 colours after scratching.
The levers are 6-way adjustable in pull, without affecting switches in general.
The anodisation of RAXIMO levers meets the highest quality standards. All screw connections comply with the DIN standard and are mounted with the prescribed torque.
-
![Our levers in comparison]()
Our levers in comparison Our levers in comparison
If a motorbike model is listed in our national type approval, you have the choice between BCF, BCS and BCE brake and clutch levers at RAXIMO.Currently, over 1500 models are listed in our 6th extension, but this is constantly being expanded.
For all variants, 9 identical colours are always available for each component, from which the levers can be individually configured in terms of colour.The adjustability of the angle to the handlebar in six steps is identical for all three variants.
A length adjustment range of 16-19 cm is available for both the BCF and the BCE levers.
The folding function, which allows the lever to fold upwards in the event of a fall, is exclusively available with our BCF lever.
-
![BCF brake lever & clutch lever]()
BCF brake lever & clutch lever BCF brake lever & clutch lever
The RAXIMO BCF brake and clutch levers in the colour combination: main part – titanium, middle part – titanium, end part – gold and adjuster – gold, here on a BMW R1200GS.
-
![BCF brake lever & clutch lever]()
BCF brake lever & clutch lever BCF brake lever & clutch lever
The RAXIMO BCF brake and clutch levers in the colour combination: main part – black, middle part – black, end part – blue and adjuster – blue, here on a Yamaha R1.
-
![BCF brake lever & clutch lever]()
BCF brake lever & clutch lever BCF brake lever & clutch lever
The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.
-
![6561 Colour combinations]()
6561 Colour combinations 6561 Colour combinations
With our BCF brake and clutch levers, you can choose the main, middle and end parts as well as the adjuster from nine colours each. This gives you a total of 6561 possible colour combinations.
The adapter/attachment part is always black.
This makes every bike unique!
-
![BCS brake lever & clutch lever]()
BCS brake lever & clutch lever BCS brake lever & clutch lever
The RAXIMO BCS brake and clutch levers in the colour combination: lever part – titanium and adjuster – green, here on a Kawasaki Z900.
-
![81 Colour combinations]()
81 Colour combinations 81 Colour combinations
With our BCS brake and clutch levers, you can choose the lever part and the adjuster from nine colours each. This gives you a total of 81 possible colour combinations.
The adapter/attachment part is always black.
This makes every bike unique!
-
![BCE brake lever & clutch lever]()
BCE brake lever & clutch lever BCE brake lever & clutch lever
The RAXIMO BCE brake and clutch levers in the colour combination: main part – blue, end part – black and adjuster – gold, here on a BMW R1250R.
-
![BCE brake lever & clutch lever]()
BCE brake lever & clutch lever BCE brake lever & clutch lever
The RAXIMO BCE brake and clutch levers in the colour combination: main part – gold, end part – black and adjuster – black, here on a BMW R1250R.
-
![729 Colour combinations]()
729 Colour combinations 729 Colour combinations
With our BCE brake and clutch levers, you can choose the main and end parts as well as the adjuster from nine colours each. This gives you a total of 729 possible colour combinations.
The adapter/attachment part is always black.
This makes every bike unique!
RAXIMO Lever Guards
Lever Guards & Bar-end mirrors
To protect the brake and clutch levers from accidental contact with another motorbike, car mirror, other obstacles or simply as a visual highlight.
Optionally mountable in combination with our RAXIMO handlebar-end mirrors.
-
![RAXIMO LEVER GUARDS]()
RAXIMO LEVER GUARDS RAXIMO LEVER GUARDS
CNC-milled aluminium, material: T6061 T6.
Adjustable by up to approx. 17 mm in length and up to approx. 30 mm in angle by means of a dovetail joint.Supplied with model-specific mounting adapter and national type approval.
-
![RAXIMO Lever Guards]()
RAXIMO Lever Guards RAXIMO Lever Guards
The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.
-
![RAXIMO Lever Guards]()
RAXIMO Lever Guards RAXIMO Lever Guards
The RAXIMO Lever Guards in the colour combination: add-on part – blue, middle part – blue and end part – silver, here on a Suzuku GSX-R1000.
-
![729 Colour combinations]()
729 Colour combinations 729 Colour combinations
With our Lever Guards, you can choose from nine colours each for the attachment, middle and end part. This gives you a total of 729 possible colour combinations.
This makes every bike unique!
-
![Bar-end mirror]()
Bar-end mirror Bar-end mirror
Mount our Lever Guards optionally with our RAXIMO BEM-V1 bar-end mirrors.
-
![RAXIMO Lever Guards]()
RAXIMO Lever Guards RAXIMO Lever Guards
The RAXIMO Lever Guards in the colour combination: add-on part – blue, middle part – blue and end part – titanium, here on a Yamaha MT07.
-
![RAXIMO Lever Guards]()
RAXIMO Lever Guards RAXIMO Lever Guards
The RAXIMO Lever Guards in the colour combination: add-on part – black, middle part – red and end part – black, here on a BMW F900XR.
-
![RAXIMO Adapter]()
RAXIMO Adapter RAXIMO Adapter
To fit our RAXIMO Lever Guards and handlebar end mirrors, you will need the appropriate adapters for each model. These are automatically supplied with your order.
-
![RAXIMO Bar-end mirrors]()
RAXIMO Bar-end mirrors RAXIMO Bar-end mirrors
Our "BEM-V1" bar-end mirrors from RAXIMO have an E-number and are therefore registration-free. The mirror arm can be adjusted laterally by up to 4 cm by means of an additional joint. It can be mounted facing upwards or downwards.
-
![RAXIMO Bar-end mirrors]()
RAXIMO Bar-end mirrors RAXIMO Bar-end mirrors
The scope of delivery includes the model-specific adapters and black end caps. Optionally, the mirrors can also be fitted with coloured end caps in one of 9 colours and RAXIMO Lever Guards.
-
![End caps for RAXIMO Bar-end mirrors]()
End caps for RAXIMO Bar-end mirrors End caps for RAXIMO Bar-end mirrors
To mount the RAXIMO handlebar end mirrors, you have the choice between end caps in 8 different colours, or leverguards in 729 different colour combinations from nine colours.
-
![RAXIMO Bar-end mirrors]()
RAXIMO Bar-end mirrors RAXIMO Bar-end mirrors
Our RAXIMO Bar-end mirrors, here with end caps in blue mounted on a Yamaha MT-07.
RAXIMO Riser
RISER
Handlebar risers are used to improve seating comfort on motorbikes. They lead to a more upright sitting position, which can be more relaxing for some riders on longer tours.
-
![RAXIMO RISER – "CLASSIC"]()
RAXIMO RISER – "CLASSIC" RAXIMO RISER – "CLASSIC"
Motorbikes are generally built to one size fits all. A classic handlebar riser increases the support of the handlebar stand and the handlebars "accommodate" the rider in height. The motorbike and the seating position can thus be individually adjusted to the rider.
-
![RAXIMO RISER – "OFFSET"]()
RAXIMO RISER – "OFFSET" RAXIMO RISER – "OFFSET"
So-called "offset" handlebar risers have an offset in addition to the height, which brings the handlebar closer to the rider not only in height but also in width, or further away from him when mounted upside down, thus allowing even finer tuning than just via the height.
-
![RAXIMO RISER – "VARIO"]()
RAXIMO RISER – "VARIO" RAXIMO RISER – "VARIO"
With the Raximo handlebar riser "Vario" we offer you the settings in height and offset even variable, because here by the freely selectable angle distance and height are defined. A setting further away or closer to you is no problem, because "Vario" uses the 2-axis principle to give you the greatest possible adjustment options here.
-
![Our risers in comparison]()
Our risers in comparison Our risers in comparison
New in our range: our RAXIMO RISER - TÜV approved!
Available in black, as well as silver and depending on the model in the versions "CLASSIC", "OFFSET" and "VARIO".
-
![RAXIMO Riser – "CLASSIC"]()
RAXIMO Riser – "CLASSIC" RAXIMO Riser – "CLASSIC"
The RAXIMO "CLASSIC" Riser in silver, here on a BMW F900XR.
-
![RAXIMO Riser – "CLASSIC"]()
RAXIMO Riser – "CLASSIC" RAXIMO Riser – "CLASSIC"
Available in black and silver.
-
![RAXIMO Riser – "CLASSIC"]()
RAXIMO Riser – "CLASSIC" RAXIMO Riser – "CLASSIC"
TÜV approved for many models and accordingly available for handlebars with diameter of 22.2 mm, 28.6 mm or 32.2 mm and an increase of 20-50 mm.
-
![RAXIMO Riser – "CLASSIC – Adapter"]()
RAXIMO Riser – "CLASSIC – Adapter" RAXIMO Riser – "CLASSIC – Adapter"
Even a conversion from 22.2 mm to 28.6 mm handlebars is no problem with our risers.
-
![RAXIMO RISER – "OFFSET"]()
RAXIMO RISER – "OFFSET" RAXIMO RISER – "OFFSET"
The RAXIMO "OFFSET" Riser in silver, here on a BMW F900XR.
-
![RAXIMO RISER – "OFFSET"]()
RAXIMO RISER – "OFFSET" RAXIMO RISER – "OFFSET"
The RAXIMO "OFFSET" Riser in silver, here on a BMW F900XR.
-
![RAXIMO RISER – "OFFSET"]()
RAXIMO RISER – "OFFSET" RAXIMO RISER – "OFFSET"
Available in black and silver.
-
![RAXIMO RISER – "OFFSET"]()
RAXIMO RISER – "OFFSET" RAXIMO RISER – "OFFSET"
TÜV approved for many models and with a height of 30 mm and an offset of 20 mm accordingly available for handlebar diameter 22.2 mm as well as 28.6 mm.
-
![RAXIMO RISER – "VARIO"]()
RAXIMO RISER – "VARIO" RAXIMO RISER – "VARIO"
The RAXIMO "VARIO" Riser in black, here on a KTM Duke 790.
-
![RAXIMO RISER – "VARIO"]()
RAXIMO RISER – "VARIO" RAXIMO RISER – "VARIO"
Continuously adjustable, here in combination with the RAXIMO aluminum handlebar "NEW GENERATION" in red.
-
![RAXIMO RISER – "VARIO"]()
RAXIMO RISER – "VARIO" RAXIMO RISER – "VARIO"
Available in black and silver.
-
![RAXIMO RISER – "VARIO"]()
RAXIMO RISER – "VARIO" RAXIMO RISER – "VARIO"
TÜV approved for many models and with a height of 55 mm accordingly available for handlebar diameter 22.2 mm, 25.4 mm and 28.6 mm and for handlebar diameter 32.2 mm with a height of 60 mm.
RAXIMO Riser Sets
"Booster" & "Offset Booster"
The risers are suitable for handlebars with a diameter of 22 mm, 25 mm and 28 mm. There are 3 spacer bushings with 10 mm, 20 mm and 30 mm included. These can be mounted individually or in combination. This results in an increase of approx. 30–90 mm (measured to the centre of the handlebar). The offset riser has an additional offset of 12 mm.
-
![Riser Set "Booster"]()
Riser Set "Booster" Riser Set "Booster"
- aluminium CNC milled and black/orange anodised
- incl. ABE (TÜV approved, no registration in the papers necessary)
-
![Riser Set "Booster"]()
Riser Set "Booster" Riser Set "Booster"
- for handlebars with 22 mm, 25 mm & 28 mm diameter
- Increase by means of distance bushings from 20–80 mm variably adjustable
-
![Riser Set "Offset Booster"]()
Riser Set "Offset Booster" Riser Set "Offset Booster"
- aluminium CNC milled and black/orange anodised
- incl. ABE (TÜV approved, no registration in the papers necessary)
-
![Riser Set "Offset Booster"]()
Riser Set "Offset Booster" Riser Set "Offset Booster"
- Offset to the rear (offset) 12 mm, can of course also be rotated by 180 degrees if required
- for handlebars with 22 mm, 25 mm & 28 mm diameter
- Increase by means of distance bushings from 20–80 mm variably adjustable
-
![Riser set "Booster" for 22mm handlebar height 20-80mm]()
Riser set "Booster" for 22mm handlebar height 20-80mm Riser set "Booster" for 22mm handlebar height 20-80mm
- Variable height adjustment by means of spacer bushes supplied
- from 20mm to 80mm
- for handlebars with 22mm diameter
- the risers are CNC machined from aluminium
- incl. cover on top with black anodised bolts
- different bolt lengths included
- with ABE / TÜV no registration in the papers necessary
- 3 spacer bushings with 10mm, 20mm and 30mm are included
- these can be mounted individually or in combination
- This results in an increase from the lowest without bushings of approx. 30mm
- and from the highest 90mm measured to the middle of the handlebar.
-
![Riser set "Booster" for 1 inch (25.4mm) handlebar height 20-80mm]()
Riser set "Booster" for 1 inch (25.4mm) handlebar height 20-80mm Riser set "Booster" for 1 inch (25.4mm) handlebar height 20-80mm
- Increase variably adjustable by means of supplied spacers
- from 20mm to 80mm
- for handlebars with 1 inch diameter (25.4mm)
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized screws
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 30mm
- and from the highest 95mm measured to handlebar center
-
![Riser set "Booster" for 28.6mm handlebar height 18-78mm]()
Riser set "Booster" for 28.6mm handlebar height 18-78mm Riser set "Booster" for 28.6mm handlebar height 18-78mm
- Increase variably adjustable by means of supplied spacers
- from 20mm to 80mm
- for handlebars 28.6mm diameter (conical handlebars)
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized screws
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 32mm
- and from the highest 92mm measured to handlebar center
-
![Riser set "Booster" for 28.6mm handlebar height 18-78mm Orange]()
Riser set "Booster" for 28.6mm handlebar height 18-78mm Orange Riser set "Booster" for 28.6mm handlebar height 18-78mm Orange
- Increase variably adjustable by means of supplied spacers
- from 20mm to 80mm
- for handlebars 28.6mm diameter (conical handlebars)
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized screws
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 32mm
- and from the highest 92mm measured to handlebar center
-
![Riser Set "Offset Booster" 22.2mm handlebar height 20-80mm offset 12mm]()
Riser Set "Offset Booster" 22.2mm handlebar height 20-80mm offset 12mm Riser Set "Offset Booster" 22.2mm handlebar height 20-80mm offset 12mm
- Increase Variably adjustable by means of supplied spacers
- from 20mm to 80mm
- Offset to the rear 12mm, can of course also be rotated by 180 degrees if required
- for handlebars with 22mm diameter
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized screws
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 30mm
- and from the highest 90mm measured to handlebar center
-
![Riser Set "Offset Booster" for 1 inch (25.4mm) handlebar height 20-80mm Offset 12mm]()
Riser Set "Offset Booster" for 1 inch (25.4mm) handlebar height 20-80mm Offset 12mm Riser Set "Offset Booster" for 1 inch (25.4mm) handlebar height 20-80mm Offset 12mm
- Increase Variably adjustable by means of supplied spacers
- from 20mm to 80mm
- for handlebars with 1 inch diameter (25,4mm)
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized screws
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 30mm
- and from the highest 95mm measured to handlebar center
-
![Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm]()
Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm
- Increase Variably adjustable by means of supplied spacers
- from 18mm to 78mm
- for handlebars 28.6mm diameter (conical handlebars)
- with 12mm offset to the rear, can also be rotated 180 degrees if necessary.
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized bolts
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 32mm
- and from the highest 92mm measured to handlebar center
-
![Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm Orange]()
Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm Orange Riser Set "Offset Booster" for 28.6mm handlebar height 18-78mm Offset 12mm Orange
- Increase Variably adjustable by means of supplied spacers
- from 18mm to 78mm
- for handlebars 28.6mm diameter (conical handlebars)
- with 12mm offset to the rear, can also be rotated 180 degrees if necessary.
- the risers are CNC machined from aluminum
- incl. cover on top with black anodized bolts
- different bolt lengths included
- with ABE / TÜV no entry in the papers required
- there are 3 distance bushings with 10mm, 20mm and 30mm included
- these can be mounted individually or combined
- This results in an increase from the lowest without bushings of about 32mm
- and from the highest 92mm measured to handlebar center
RAXIMO Handlebar
Alloy Handlebar
Raximo manufactures for you handlebars made of high quality aluminum alloy, which guarantees an excellent combination of hardness and flexibility. The design in three sizes and different angles and offsets covers many motorcycle models. In addition, we offer you the three types of handlebars in 8 attractive colors through high quality anodizing that makes the handlebars not only look very good, but also protects them from corrosion.
-
![Handlebar – Raximo "STREET"]()
Handlebar – Raximo "STREET" Handlebar – Raximo "STREET"
in eight available colors replaces with style and a great geometry the steel handlebars on many models.
With a length of 730 mm, the handlebar is suitable for many motorcycles and with the National Type Approval registration-free! For many other models it is registrable.
Steering tube diameter: 22 mm
Width: 730 mm, height: 90 mm, offset: 70 mm, maximum outer distance Riser: 120 mm -
![Handlebar – RAXIMO "TOUR"]()
Handlebar – RAXIMO "TOUR" Handlebar – RAXIMO "TOUR"
The handlebar, which provides a width of 810 mm and a pleasant offset of 83 mm on many tours for a relaxed ride. Choose one of eight available colors and design your bike to your taste.
Steering tube diameter: 22 mm
Width: 810 mm, height: 95 mm, offset: 83 mm, maximum outer distance Riser: 160 mm -
![Handlebar – RAXIMO "NEW GENERATION"]()
Handlebar – RAXIMO "NEW GENERATION" Handlebar – RAXIMO "NEW GENERATION"
The New Generation handlebar from Raximo is designed for higher torsional stiffness on newer motorcycle models. With thicker material (28 mm Ø) in the area of the clamp and 800 mm projection, it improves the driving experience on many models.
Steering tube diameter outside: 22 mm, inside: 28.5 mm
Width: 800 mm, height: 120 mm
Offset: 75 mm, maximum outer distance riser: 170 mm -
![RAXIMO Handlebars comparison]()
RAXIMO Handlebars comparison RAXIMO Handlebars comparison
Here you can find an overview of all dimensions for comparison.
-
![Handlebar – RAXIMO "STREET"]()
Handlebar – RAXIMO "STREET" Handlebar – RAXIMO "STREET"
Available in the eight original RAXIMO shades.
-
![Handlebar – RAXIMO "STREET"]()
Handlebar – RAXIMO "STREET" Handlebar – RAXIMO "STREET"
With the help of the scale, the handlebar can be optimally aligned.
-
![Handlebar – RAXIMO "STREET"]()
Handlebar – RAXIMO "STREET" Handlebar – RAXIMO "STREET"
The knurled handlebar exterior provides optimum grip for handlebar grips.
-
![Handlebar – RAXIMO "STREET"]()
Handlebar – RAXIMO "STREET" Handlebar – RAXIMO "STREET"
Here again all dimensions at a glance.
-
![Handlebar – RAXIMO "TOUR"]()
Handlebar – RAXIMO "TOUR" Handlebar – RAXIMO "TOUR"
Available in the eight original RAXIMO shades.
-
![Handlebar – RAXIMO "TOUR"]()
Handlebar – RAXIMO "TOUR" Handlebar – RAXIMO "TOUR"
With the help of the scale, the handlebar can be optimally aligned.
-
![Handlebar – RAXIMO "TOUR"]()
Handlebar – RAXIMO "TOUR" Handlebar – RAXIMO "TOUR"
The knurled handlebar outside provides optimum grip for handlebar grips.
-
![Handlebar – RAXIMO "TOUR"]()
Handlebar – RAXIMO "TOUR" Handlebar – RAXIMO "TOUR"
Here again all dimensions at a glance.
-
![Handlebar– RAXIMO "NEW GENERATION"]()
Handlebar– RAXIMO "NEW GENERATION" Handlebar– RAXIMO "NEW GENERATION"
Available in the eight original RAXIMO shades.
-
![Handlebar– RAXIMO "NEW GENERATION"]()
Handlebar– RAXIMO "NEW GENERATION" Handlebar– RAXIMO "NEW GENERATION"
With the help of the scale, the handlebar can be optimally aligned.
-
![Lenker – RAXIMO "NEW GENERATION"]()
Lenker – RAXIMO "NEW GENERATION" Lenker – RAXIMO "NEW GENERATION"
The knurled handlebar outside provides optimum grip for handlebar grips.
-
![Handlebar – RAXIMO "NEW GENERATION"]()
Handlebar – RAXIMO "NEW GENERATION" Handlebar – RAXIMO "NEW GENERATION"
Here again all dimensions at a glance.
RAXIMO Handlebar
Alloy Drag Bar
The extra flat Drag Bar handlebar from Raximo is ideal for conversions for choppers, cruisers and naked bikes and gives your motorcycle the individual Drag Star character. Choose one of four available colors and design your bike to your taste.
-
![RAXIMO - Drag Bar 22 mm]()
RAXIMO - Drag Bar 22 mm RAXIMO - Drag Bar 22 mm
Available in four colors, it replaces with style and a great geometry, the steel handlebars on many models.
With a length of 800 mm, the drag bar is suitable for many motorcycles and due to the National Type Approval registration-free!
Width: 800 mm, height: 96 mm, outer diameter in the area of the clamp and the handles: 22.2 mm, inner diameter: approx. 12 mm, width at the attachment: approx. 210 mm -
![RAXIMO - Drag Bar 1 Inch]()
RAXIMO - Drag Bar 1 Inch RAXIMO - Drag Bar 1 Inch
Available in four colors, it replaces with style and a great geometry, the steel handlebars on many models.
With a length of 800 mm, the drag bar is suitable for many motorcycles and due to the National Type Approval registration-free!
Width: 850 mm, height: 99 mm, outer diameter in the area of the clamp: 1 inch/25.4 mm, outer diameter in the area of the grips: 1 inch/25.4 mm, inner diameter: approx. 15 mm, width at the attachment: approx. 220 mm -
![RAXIMO - Drag Bar 28,6 mm]()
RAXIMO - Drag Bar 28,6 mm RAXIMO - Drag Bar 28,6 mm
Available in four colors. With its reinforced diameter (28.6 mm Ø) in the area of the clamping and 825 mm width, the driving feel is deutlich verbessertrt. The Drag Bar is suitable for many models and due to the National Type Approval registration free!
Width: 825 mm, offset to the rear: 100 mm, outer diameter in the area of the clamping: 28.6 mm, outer diameter in the area of the handles: 22.2 mm, inner diameter: approx. 12 mm, width at the attachment: approx. 220 mm -
![RAXIMO Drag Bar in comparison]()
RAXIMO Drag Bar in comparison RAXIMO Drag Bar in comparison
Here you can find an overview of all dimensions for comparison.
-
![Drag Bar - RAXIMO 22 mm]()
Drag Bar - RAXIMO 22 mm Drag Bar - RAXIMO 22 mm
Available in four colors.
-
![Drag Bar - RAXIMO 22 mm]()
Drag Bar - RAXIMO 22 mm Drag Bar - RAXIMO 22 mm
Scaling for easy alignment on the clamping of the handlebar.
-
![Drag Bar - RAXIMO 22 mm]()
Drag Bar - RAXIMO 22 mm Drag Bar - RAXIMO 22 mm
Available with or without perforation for internal cable routing.
-
![Drag Bar - RAXIMO 22 mm]()
Drag Bar - RAXIMO 22 mm Drag Bar - RAXIMO 22 mm
Here again all dimensions at a glance.
-
![Drag Bar - RAXIMO 1 inch]()
Drag Bar - RAXIMO 1 inch Drag Bar - RAXIMO 1 inch
Available in four colors.
-
![Drag Bar - RAXIMO 1 inch]()
Drag Bar - RAXIMO 1 inch Drag Bar - RAXIMO 1 inch
Scaling for easy alignment on the clamping of the handlebar.
-
![Drag Bar - RAXIMO 1 inch]()
Drag Bar - RAXIMO 1 inch Drag Bar - RAXIMO 1 inch
Available with or without perforation for internal cable routing.
-
![Drag Bar - RAXIMO 1 inch]()
Drag Bar - RAXIMO 1 inch Drag Bar - RAXIMO 1 inch
Here again all dimensions at a glance.
-
![Drag Bar - RAXIMO conical 28,6 mm]()
Drag Bar - RAXIMO conical 28,6 mm Drag Bar - RAXIMO conical 28,6 mm
Available in four colors.
-
![Drag Bar - RAXIMO conical 28,6 mm]()
Drag Bar - RAXIMO conical 28,6 mm Drag Bar - RAXIMO conical 28,6 mm
Scaling for easy alignment on the clamping of the handlebar.
-
![Drag Bar - RAXIMO conical 28,6 mm]()
Drag Bar - RAXIMO conical 28,6 mm Drag Bar - RAXIMO conical 28,6 mm
Available with or without perforation for internal cable routing.
-
![Drag Bar - RAXIMO conical 28,6 mm]()
Drag Bar - RAXIMO conical 28,6 mm Drag Bar - RAXIMO conical 28,6 mm
Here again all dimensions at a glance.
RAXIMO Accessories
More articles
The offer of RAXIMO main components is constantly supplemented with articles from the accessories area.
-
![RAXIMO aluminum CNC handlebar grips set]()
RAXIMO aluminum CNC handlebar grips set RAXIMO aluminum CNC handlebar grips set
Universal fit for all handlebars and handlebar ends with 22 mm outer diameter.
Weight: approx. 150 g (pair)
Total length: approx. 120 mm
Length large aluminum part: about 38 mm
Length small aluminum part: about 8 mm
Length corrugated rubber part: approx. 68mm
Outer diameter: approx. 35 mm
Inner diameter: approx. 22 mm (left side) and approx. 25 mm (throttle side)Open end, therefore can be combined with all handlebar ends, handlebar end mirrors, lever guards etc.
-
![RAXIMO BOBBINS]()
RAXIMO BOBBINS RAXIMO BOBBINS
Stand mounts set, aluminum CNC machined and color anodized in nine colors.
Available in M6, M8, M10x1.5 mm and M10x1.25 mm.
-
![Valve caps]()
Valve caps Valve caps
Aluminum CNC machined valve caps with seal against pressure loss even at high wheel speeds.
Weight: 5,5 g/piece
Width 11 mm, height 12 mmAvailable in 9 anodized colors.
-
![Brake fluid reservoir cover]()
Brake fluid reservoir cover Brake fluid reservoir cover
For many motorcycle models in the respective matching colors available.
Suitable components can be displayed via the model selection in our store.
Raximo Stores near you
In the more than 80 LOUIS stores in Europe you will find samples of Raximo levers and lever guards and our color palette of nine colors for comparison. There you can also order levers and lever guards directly and pick them up after a few days in the store.
In the Raximo stores (other icon in the map), of which there is a constantly growing number, you will find not only the Raximo range but you can also have the parts mounted there in most cases.